Drainage Tubes Reciprocating Friction Force Testing Device China Factory Price

• Customization: Available
• After-sales Service: on Line
• Warranty: 12 Months
• Model NO.: PSPT-03
• Type: Friction Testing Machine
• Maxcapacity: 10n(Standard); 5n,30n, 50n(Optional)
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Resolution: 1/300000fs
• Testing Speed: 0~1000 mm/Min
• Accuracy of Speedd: 1%
• Maximum Stroke: 400mm
• Clamp Capacity: 6n
• Trademark: Pubtester
• Origin: Jinan, Shandong
• Production Capacity: 10 Sets/Quarter
• Package Size: 50.00cm * 60.00cm * 1500.00cm
• Package Gross Weight: 100.000kg

Product Description

PSPT-03 Catheter Friction Performance Tester

 

PSPT-03 Catheter Friction Performance Tester is specialized in testing the surface sliding performance/lubricity, coating friction and coefficient of friction of non-vascular catheters, intravascular catheters, guidewires, etc., such as urinary catheters, drainage tubes, tracheal intubation tubes, balloon catheters, etc.

Technical Features
Professional Design

• Unique cyclic friction test mode, and supports multiple one-way up and multiple one-way down test modes
• Support friction times setting to meet multiple friction tests
• Static friction, kinetic friction, static coefficient of friction , kinetic coefficient of friction can be tested for one time
• Automatic clamping device, the force is settable freely, to ensure the stability of the test
• Adopt circulating water bath temperature control design to realize the test under different temperature conditions.
• Silicone pads of standardized hardness to provide a test environment close to human tissue.
• Small range sensor to ensure the accuracy of test data
• The equipment supports one-key automatic water supply and drainage function, which ensures a clean water bath environment
• 0.5%FS high-precision testing, effectively ensures the accuracy and repeatability of test results
• Equipped with advanced displacement control system, displacement accuracy can up to 0.1mm
• With advanced drive system, which can achieve infinitely variable speed and wider test speed range to meet different test conditions

Safety Configuration

• Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation.
• Equipped with UL certified emergency stop button to maximize the safety of human and machine during the test
• Real-time monitoring of system status to ensure that the equipment is always in the best operating status

Professional software

• Equipped with four levels of user security password to ensure the security of test data
• The software data is traceable, which can realize functions such as user management, rights management, data audit trail, etc., which meets the requirements of GMP (optional).
• Equipped with a standard serial communication port, which can be connected to computer software to facilitate data processing and transmission
• Pubtester also provides professional customization services to meet the individual needs of users in fixtures, software, etc.
• Free software upgrade lifetime.

Technical Specifications

Item	PSPT-03
Friction Capacity Range	10N (Standard); 5N, 30N, 50N (Optional)
Test Accuracy	0.5% FS
Clamp Capacity	6N
Test Speed	0~1000 mm/min (Adjustable)
Clamping Speed	Clamping and releasing, multi-level settings
Maximum Stroke	400mm
Number of Frictions	1~999
Temperature Control Range	Room temperature ~ 80ºC
Temperature Accuracy	±1ºC
Power supply	AC 220V 50Hz/120V 60Hz
Instrument Dimension	690mm(L) ×720mm (W) ×1435mm
Net Weight	118kg

Test Principle
Installation of catheter clamps in the clamping slots of the clamping system. Adjust the spacing between the two sliding clamps to the specified clamp spacing and then tighten the clamping tabs, ensure that the catheter clamps maintain a good fit. The end of the test catheter is passed from bottom to top through the two catheter clamping tabs, and the upper clamp of the tester holds the head of the catheter. Insert the rest of the catheter into the drum filled with water, hang naturally and soak for the manufacturer's recommended time. Adjust the position of the two sliding clamping blocks in the slots, let the catheter in the central position. Start the tester so that the catheter passes through the silicone sheet a sufficient distance, record force versus displacement curves. Take the average force value of the wetted section of the catheter body on the curve to report the results.
Standards

1. CAMDI 021-2019  Single-use hydrophilic coated guidewire

YY/T 1536-2017 Catheters other than intravascular catheters-Standard test model for evaluating the surface sliding performance
Applications
Non-vascular catheters such as urinary catheters, drainage tubes, endotracheal tubes, balloon catheters etc., intravascular catheters, guidewire

Configuration
Standard Configuration: Instrument, Computer, Water bath temperature control device, Automatic clamping device, Silicone Catheter pads, Specialized fixtures, Professional software and communication cable.
Optional Parts: Non-standard fixture (customized)
Automatic clamping force device




FAQ

Are you a manufacturer or trading company?
We are the manufacturer and trading combo, which specialize in material testing instruments such as plastic package, medical device, facial mask, protective clothing and pharmaceutical package, etc. We located in Jinan, Shandong, China.

Do you have any certificate?
We have obtained CE certificate, passed ISO 9001, IPMS management system certificates, and have 18 utility model patents and 4 software copyright certificates.

How about the installation?
The user's manual specifies the installation requirements with details. We will advise the relative information in advance, such as power supply, space, required temperature, humidity, etc.

Do you have after-sales service?
We will carry out the equipment inspection before delivery. If the machine does not work properly, we can make a remote control service to help dealing with the failure. We promise to reply within 24 hours and provide solutions within 2 working days.

How about the warranty?
Our warranty is 12 months, lifelong free of charge! User just bear the materials cost and express charge out-of-warranty period.

How long does the delivery time?
For the regular machine, 3-5 working days. For the customized one, 30 days or so.